BONT Prostar Prodigy Derby Skate

0 Rating
You save:
The Bont Prostar is a game changer for Derby! This is a high end, heat moldable fiberglass boot with high end wheels and bearings at an entry level price!
Do you know your BONT Size?
In street shoes I normally wear size

Foot measurements Length MM

Foot measurements Width MM

Upgrade to Aluminum Plate

NOTE: This skate is intended for ENTRY LEVEL and LOW WEIGHT skaters (120lbs & less). Please uprade to the Aluminum BONT Tracer Plate Option if you are are over 120 lbs and intend to use this skate for Roller Derby.

The BONT Prostar Prodigy Derby, a skate designed for you. A skate designed to be light, responsive and heat moldable. The thermoplastic in the heel allows you to mold your boot with a hairdryer to obtain a custom fit in under 10 minutes. This is especially good for skaters with skinny or wide ankles. The boot is made with microfiber and features replaceable rubber bumper toe protection, an adjustable velcro top strap and rear heel loop to put your laces through.

BONT Prostar Boot Features:
• Fiberglass
• Outer skin: Microfiber
• Liner: Microfiber
• Boot height: High
• Heel rise: 6mm
• Innersole: EVA with fabric
• Heat moldable: Fully heat moldable base utilizing epoxy thermoset resin
• Padding: Memory foam
• Size options: 1 - 12.5
• Fit options: Standard
• Vegan: Yes

The Prostar Prodigy Derby Skate offers a lightweight and affordable great for beginners and recreational skaters. The Prodigy Plate is a nylon and fiberglass composite with 20-degree action aluminum trucks and adjustable allen screw toe stops.

BONT Prodigy Plate Features:
Action: 20-degree truck angle
• Base material: Nylon and fiberglass composite
• Cushion hardness: 88A standard urethane cushions
• Kingpin: Steel
• Kingpin Locknut: 9/16" socket for adjusting
• Trucks: Aluminum
• Axles: 8mm
• Toe stop: Adjustable allen screw
• Sizes: 4.5” 5.0” 5.5” 6.0” 6.5” 7.0” 7.5” 8.0”

The Prostar Derby Skate with BONT Tracer Plate Upgrade includes a chassis that is crafted from extruded 6061 aircraft aluminum with one-piece cast trucks to make this plate stronge. The 20-degree kingpin angle is great for making tight turns as well as top-end speed and stability.

BONT Tracer Plate Features:
• Action: 20 Degree Truck Angle
• Base Material: 6061 Aircraft Aluminium
• Kingpin: Steel
• Cushion Hardness: 88A Standard Urethane Cushions
• Trucks: One-Piece Cast Truck
• Axles: 8mm
• Toe stop: Adjustable Allen Screw

BONT Boot Sizing
It's critical to get this part right prior to ordering! This size chart shows the exact size of the foot form or 'last' that is used to create each specific size of BONT boots. As a basic rule, most skaters like their boots to be 3-4mm longer than the last. This allows for your feet to grow in length when the boots are tightened. If you like your boots super tight, then just add 1-2mm but be warned, your toes will touch the end and possibly be scrunched. To find your size, place a tape measure on a flat surface up against a wall. Stand on the tape measure with your heel against the wall. If you use a ruler, take into consideration that most rulers have a gap where there are no measurements. Look down and take the measurement from your longest toe. Then use the MM scale on the size chart to find your size...

foot measureSize Chart

Here are some examples of mm sizes and the boot size that BONT recommends:
253mm + 4mm you should order size 6.5
258mm + 4mm you should order size 7
273mm + 4mm you should order size 9
291mm + 4mm you should order size 11

Ready to Order your New BONTS?
If you are confident you have selected the right BONT size for yourself, by this measuring method or maybe you have had BONT boots before or tried a friends on, or tried actual BONT sizing stock somehwere in person (available by appointment at then you are all set to order your BONT boot or skate! if you want to doublecheck everything with us to make sure you order the right size please send an email to:

There are yet no reviews for this product.

Please log in to write a review. Log in